.png)
-
RS-422/RS-485/RS-232 interface splitters
-
RS-422/485 PR-3 interface splitter
-
RS-422/485 PR-4 interface splitter
-
RS-422/485 PR-6 interface splitters
-
RS-422/485 PR-8 interface splitters
-
RS-422/485 PR-10 interface splitters
-
RS-485 interface splitters, equipped with 120 Ohm terminators installed
-
RS-485 RK-3 interface and power splitters
-
TP-4 interface terminators
-
_1.png)
DIN rail interface splitters RS-422/485
-
- RS-422 / RS-485 / RS-232 converters and repeaters
- Surge protection devices
- Hour counter
- Modules input-output
- Surge suppression filters
- Voltage relay
- Time relay
- Phase control relay
- Insulation monitoring relay
- Photo relay
- PSU power supplies
- Measuring instruments
- Electronic phase switch
- Transitional test box
- Motor protection device (MPD)
- New devices in development
- Custom development
- Potential equalization box (KUP)
- Intermediate relays
- Load resistors
- Programmable Logic Controller (PLC)
OPS-10S-1PN Class 2 (without signaling)
SPD is designed for operation in single-phase or three-phase AC networks with voltage up to 440V and frequency 50 Hz. The SPD makes it possible to limit the overvoltage, to achieve a high diverting capacity and a high response speed.
For remote control of the SPD, an alarm can be set to monitor the operating status of the device.
- Description
- Specifications
- Shipping
-
Surge protection devices (SPD) of the OPS-10 series are used to protect electrical networks and electrical equipment from direct or indirect effects of lightning and surge surges.
SPD is designed for operation in single-phase or three-phase AC networks with voltage up to 440V and frequency 50 Hz. The SPD makes it possible to limit the overvoltage, to achieve a high diverting capacity and a high response speed.
For remote control of the SPD, an alarm can be set to monitor the operating status of the device. -
Enclosure version
Class 1 (B)
Class 2 (C)
Class 3 (D)
Degree of protection according to GOST 14254-96
IP20
Type execution
varistor / gas discharge
Operating temperature range, °C
-40...+50
Cross section of connected conductors, mm
4...25
Number of poles
1...4
Weight of 1 pole, kg
0,15
Response time, ns
25
Operating voltage, V
440
440
250
Maximum impulse voltage, V
6000
Protective level voltage, kV
2,0
1,8
1,0
Classification voltage, V
700
650
530
Maximum current, A
100
63
25
Overall dimensions, mm
Length
90.25
Height
64.75
Width of one module
18
fire resistance
Refractory
-
Delivery in Cheboksary is free of charge.
If you order delivery in Cheboksary before 13 hours, delivery is carried out the next day.
The courier is closed on weekends and public holidays.
Delivery in Russia and the CIS countries (Belarus, Kazakhstan, etc.) is carried out through the transport company of your choice. The delivery time depends on the selected company and your location. The exact cost of delivery is calculated by your manager after placing an order on the website or sending an email request. The delivery terms are calculated based on the tariffs of the transport service you selected.
Delivery to the terminal of the transport company in Cheboksary - free of charge!
We work with the following transport companies:
SDEC;
Business lines;
PECK;
Russian Post;
you can also call a courier or pick up the goods by pickup.
Ask a question