.png)
-
RS-422/RS-485/RS-232 interface splitters
-
RS-422/485 PR-3 interface splitter
-
RS-422/485 PR-4 interface splitter
-
RS-422/485 PR-6 interface splitters
-
RS-422/485 PR-8 interface splitters
-
RS-422/485 PR-10 interface splitters
-
RS-485 interface splitters, equipped with 120 Ohm terminators installed
-
RS-485 RK-3 interface and power splitters
-
TP-4 interface terminators
-
_1.png)
DIN rail interface splitters RS-422/485
-
- RS-422 / RS-485 / RS-232 converters and repeaters
- Surge protection devices
- Hour counter
- Modules input-output
- Surge suppression filters
- Voltage relay
- Time relay
- Phase control relay
- Insulation monitoring relay
- Photo relay
- PSU power supplies
- Measuring instruments
- Electronic phase switch
- Transitional test box
- Motor protection device (MPD)
- New devices in development
- Custom development
- Potential equalization box (KUP)
- Intermediate relays
- Load resistors
- Programmable Logic Controller (PLC)
Be always up to date!
Find out about discounts and promotions first
News
All news
20 December 2019
Republican forum of entrepreneurs. Business Trends 2020
9 December 2019
International Forum "Power Grids - 2019" (IFES)
28 November 2019
Business mission from the Republic of Uzbekistan
Block of snubber chains BSC-6
Recommend
The block of snubber circuits (hereinafter referred to as the device) is designed to suppress voltage surges that occur during switching of inductive components (electromagnetic relays, starters, contactors, etc.). The use of protective RC circuits increases the service life of contacts that switch the windings several times, reduces interference that occurs during switching.
The device is connected in parallel to the switched winding or in parallel to the contact switching the winding. For connection, the device has six groups of screw terminals.
The device is available in a plastic case that does not support gorenje, and provides for mounting the device on a DIN rail 35 mm.
The device is connected in parallel to the switched winding or in parallel to the contact switching the winding. For connection, the device has six groups of screw terminals.
The device is available in a plastic case that does not support gorenje, and provides for mounting the device on a DIN rail 35 mm.
More details
564 rub./pcs.
Many
-
+
Documents
- Description
- Specifications
- Shipping
-
The block of snubber circuits (hereinafter referred to as the device) is designed to suppress voltage surges that occur during switching of inductive components (electromagnetic relays, starters, contactors, etc.). The use of protective RC circuits increases the service life of contacts that switch the windings several times, reduces interference that occurs during switching.
The device is connected in parallel to the switched winding or in parallel to the contact switching the winding. For connection, the device has six groups of screw terminals.
The device is available in a plastic case that does not support gorenje, and provides for mounting the device on a DIN rail 35 mm. -
Technical specifications
Version BSC-6
Overall dimensions, no more than 90 x 58 x 36 mm
Degree of protection according to GOST 14254-96 IP20
Snubber capacitor capacity, UF 0.1
Snubber resistor resistance, 100 ohms
Rated operating voltage, V 250
Maximum operating voltage, V 400
Cross-section of the connected conductors 0.2...2.5 mm
Operating temperature range -40...+60 °C
Relative humidity, no more than 80.00%
Weight not more than 0.2 kg
-
Delivery in Cheboksary is free of charge.
If you order delivery in Cheboksary before 13 hours, delivery is carried out the next day.
The courier is closed on weekends and public holidays.
Delivery in Russia and the CIS countries (Belarus, Kazakhstan, etc.) is carried out through the transport company of your choice. The delivery time depends on the selected company and your location. The exact cost of delivery is calculated by your manager after placing an order on the website or sending an email request. The delivery terms are calculated based on the tariffs of the transport service you selected.
Delivery to the terminal of the transport company in Cheboksary - free of charge!
We work with the following transport companies:
SDEC;
Business lines;
PECK;
Russian Post;
you can also call a courier or pick up the goods by pickup.
Web-form is not found.