.png)
-
RS-422/RS-485/RS-232 interface splitters
-
RS-422/485 PR-3 interface splitter
-
RS-422/485 PR-4 interface splitter
-
RS-422/485 PR-6 interface splitters
-
RS-422/485 PR-8 interface splitters
-
RS-422/485 PR-10 interface splitters
-
RS-485 interface splitters, equipped with 120 Ohm terminators installed
-
RS-485 RK-3 interface and power splitters
-
TP-4 interface terminators
-
_1.png)
DIN rail interface splitters RS-422/485
-
- RS-422 / RS-485 / RS-232 converters and repeaters
- Surge protection devices
- Hour counter
- Modules input-output
- Surge suppression filters
- Voltage relay
- Time relay
- Phase control relay
- Insulation monitoring relay
- Photo relay
- PSU power supplies
- Measuring instruments
- Electronic phase switch
- Transitional test box
- Motor protection device (MPD)
- New devices in development
- Custom development
- Potential equalization box (KUP)
- Intermediate relays
- Load resistors
- Programmable Logic Controller (PLC)
Photo relay FR11A
- Description
- Specifications
- Shipping
-
Analog photo relay device FR11A designed to automatically turn on and off the load connected to the relay according to the set light level. Light control is carried out using a remote sensor.
-
-
Parameter
Meaning
On/off delay, sec
13
Supply voltageA.C., IN
220
Mains frequencyAC,Hz
50
Power consumption DC, W, no more
1,25
Power consumption AC, VA, no more
2,5
Maximum switching current DC (30V), A
16
Maximum switching current AC (250V 50Hz), A
16
Maximum switching voltage DC (at current no more than 0.2A), V
300
Maximum switching voltage AC, V
400
Insulation voltage between power circuits and relay contacts, kV
3
Maximum sensor cable length, m
30
Insulation voltage between power circuits and light sensor input, kV
-
Insulation voltage by relay contacts, kV
1
Relay readiness time (turning on the relay after power supply), no more, mS
150
Relay readiness time, no more, mS
20
Vibration resistance (30…300)Hz, g
5
Ambient temperature, °C
-25...+50
Relative air humidity (at a temperature of +25 °C and below), no more than, %
80
Atmospheric pressure, kPa
84...100
Housing protection degree
IP20
Sensor protection degree
IP65
Weight, no more than, g
200
Overall dimensions of the relay, mm
18x95x67
Overall dimensions of the sensor, mm
58x89x37
-
-
Delivery in Cheboksary is free of charge.
If you order delivery in Cheboksary before 13 hours, delivery is carried out the next day.
The courier is closed on weekends and public holidays.
Delivery in Russia and the CIS countries (Belarus, Kazakhstan, etc.) is carried out through the transport company of your choice. The delivery time depends on the selected company and your location. The exact cost of delivery is calculated by your manager after placing an order on the website or sending an email request. The delivery terms are calculated based on the tariffs of the transport service you selected.
Delivery to the terminal of the transport company in Cheboksary - free of charge!
We work with the following transport companies:
SDEC;
Business lines;
PECK;
Russian Post;
you can also call a courier or pick up the goods by pickup.
Ask a question